1-90
CKY-6614 WSB- Card
90
IEI
®
Technology, Corp.

UDMA1
Ultra DMA mode 0 selected with a maximum data transfer
rate of 16.6MBps

UDMA1
Ultra DMA mode 1 selected with a maximum data transfer
rate of 25MBps

UDMA2
Ultra DMA mode 2 selected with a maximum data transfer
rate of 33.3MBps

UDMA3
Ultra DMA mode 3 selected with a maximum data transfer
rate of 44MBps (To use this mode, it is required that an
80-conductor ATA cable is used.)

UDMA4
Ultra DMA mode 4 selected with a maximum data transfer
rate of 66.6MBps (To use this mode, it is required that an
80-conductor ATA cable is used.)

UDMA5
Ultra DMA mode 5 selected with a maximum data transfer
rate of 99.9MBps (To use this mode, it is required that an
80-conductor ATA cable is used.)
 S.M.A.R.T [Auto]
Self-Monitoring Analysis and Reporting Technology (SMART) feature can help predict
impending drive failures. The S.M.A.R.T BIOS option allows you to enable or disable this
function.

Auto
(Default) BIOS to auto detects if the hard disk drive supports
S.M.A.R.T. Use this setting if the IDE disk drive support
cannot be determined.

Disabled
Select this value to prevent the BIOS from using the
SMART feature.

Enabled
Select this value to allow the BIOS to use the SMART
feature on support hard disk drives.
To Next Page
Loading...
Need help?
General
