IEMCA VIP 80 - Main Screenful - Description

8
1
GENERAL INFORMATION
302.061
1.2. MAIN SCREENFUL - Description
When loading is on, the following screenful appears on the display:
it appears:
press:
it appears:
press:
to return to the initial screenful
❑
If the operator needs to reset the workpiece counter
Display the screenful:
it appears:
MANUAL MODE
Ba r f e ede r wa i t i ng
Pos i t i on f rom ‘F’ i d
eal 144.66(mm)
Pos i t i on f rom ‘ 0 ’
3.34(mm)
Pos i t i on f rom ‘F’ i d
eal 144.66(mm)
Pos i t i on f rom ‘ 0 ’
3.34(mm)
Spe ed
(mm/ s e c )
To t a l workp i e c e s
50
Pos i t i on f rom ‘F’ i d
eal 144.66(mm)
Pos i t i on f rom ‘ 0 ’
3.34(mm)
Spe ed
0(mm/sec)
To t a l workp i e c e s
50