17
2
INSTALLATION PROCEDURE
302.061
❑
Parameters with self-learned values
A default value is assigned to the parameters.
Actually, some parameters are self-learned variables of the PLC, which vary
during normal bar feeder operation.
On the screenful reproduced on this manual, the self-learned value is repre-
sented by an asterisk (*).
INFORMATION:
the values assigned to the parameters are organized into two categories. The first one compri-
ses the values referring to the motor speed reduction ratio of reducer to 1/6 (standard values);
the second one ( values in bracktes ) includes the values referring to the motor speed reduction
ratio of the reduce to 1/4.
To Next Page
Loading...
