OPERATION
@
Travel Lever
f
>
Forward
*
Normal traveling
a
when the drive sprocket are
under the rear of the machine. Blade are under
the front of the cab. Reverse traveling is when
the cab is over the sprockets. Both the
d~rectlonal and travel~ng
functions
will be
reversed.
Always travel with sprockets under the rear of
the machine.
J
Forward Direction Travel
:
Move the both travel levers forward to move the
machine forward direction.
Stop
:
Release the travel levers to stop the machine and
apply the brakes.
Reverse Direction Travel
:
Move the both travel levers rear to move the machine
reverse direction.
Refer to Traveling the Machine section of this manual.
@
High Speed Travel Pedal
BLADE
*
NEVER
high speed travel on a grade or loading
and unloading the machine.
*
When control shut-off lever is locked, does not
change to high speed travel.
L
Low Speed Travel
Release the pedal to low speed travel. Select the
(push
LOW
speed travel when driving on rough or soft
surface. Low is also recommended for loading or
unloading from a truck.
High Speed Travel
During push down the pedal to shift the high speed
travel. Select the
HIGH
speed travel when driving on
a hard even surface.
To Next Page
Loading...
