MAINTENANCE
RECOMMENDED LUBRICATION TABLE
Note:
1.
Oils in the hydraulic fluid columns marked with *should be use above
0°C.
2.
If the oil becomes dirty or deterioration
of
the oil's properties are excessive, replace more
frequently than described above.
3.
Disassemble the track roller and upper roller when replacing the oil in them.
LOCATION
Diesel Engine
Hydraulic Oil
Track Rollers
Front Idlers
Travel
Dr~ves
Lubricate
the Fitting
USE
Cold Regions
General
Tropical
Regions
Ambient
Temperature
-5°C
Ambient
Temperature
Below -5°C
-
-
-
-
LUBRICANT
VISCOSITIES
API, Class CD
SAE2O
API, Class CD
SAE30
API, Class CD
SAE40
Wear Proof
Hydraulic Fluid
IS0
-
VG46
Wear Proof
Hydraulic Fluid
IS0
-
VG32
API, GL-4 or GL-5,
ISO-VG320
(SAESO)
Gear Oil
API, Class
CD
SAE30
EP2 Lithium
Grease
REFILL
CAPACITIEAS
(APPROXIMATE)
Max.
1.6 liter
Min.
0.6 liter
Total
amount
14 liter
Tank Capacity
8.2 liter
0.05 liter
(Each)
0.02 liter
(Each)
0.33 liter
(Each)
Swing
CHANGE
l
NTERVALS
250 Hrs.
Initial oil
change
50 hours
1000 Hrs.
(500 Hrs.
when
breaker
used)
Upon
occasion
Upon
occasion
1000 Hrs.
Bearing.
Attachment pins, etc.
To Next Page
Loading...
