MAINTENANCE
m
Clean
the Fuel Filter Element
Hot oil and components can cause personal
injury.
*
Fuel leaked or spelled on to hot surfaces can
cause a fire.
1.
Stop the engine.
2.
Turn the fuel stop lever
a
to the 'closed" (OFF)
position.
3.
Loosen the ring nut
0.
4.
Remove the cup
0
and the element
@.
5.
Drain water and sediment into a suitable container.
NOTE:
Always dispose of drained fluids as
established by local regulations.
6.
Clean the inside surface of the cup and the element
@.
7.
Install the clean element
@.
8.
Install cup
0.
Tighten ring nut
0.
9.
Turn the fuel stop lever to the "opened" (ON)
position.
NOTE:
Do not start the engine until all fuel system
service is completed.
Air purge method
Purge air after maintenance of the fuel filter is
performed or the fuel tank is emptied.
(1)
Fill the fuel tank with fuel.
(2)
Press down lever
O
of fuel pump
@
several
times to fill fuel in cup
0
of the fuel filter.
Fuel filter
(with
a
water sedimenter
function)
I
~rehilter
(Fuel filter)
O
Lever
(Close)
Ci:.z,.
-.
.:......'
position
s;'
5
O-ring
\
i:
.
?
,
b
cup
d
Lever
To Next Page
Loading...
