MAINTENANCE
9NX
Walk-Around inspection
lnspect the operator's compartment for cleanliness.
Keep it clean.
lnspect the loose bolts, Tighten any loose bolts.
Repair if necessary..
lnspect any cracks in boom and arm pivot area and
cylinder mounting brackets.
Repair if damaged.
lnspect attachment cylinders, linkage and bucket for
damage or excessive wear. Repair if damaged.
lnspect and remove any trash build up in the engine
compartment.
lnspect the cooling system for leaks, faulty hose and
trash built up. Correct any leaks and remove any
trash from the radiator.
lnspect the hydraulic system for leaks. lnspect the
tank, cylinder rod seals. tubes, plugs, joints and
fittings. Correct any leaks.
lnspect and repair travel drive leaks. Check oil level if
leakage is noticed.
Daily Lubrication
Perform the daily lubrication as required by the
Lubrication Chart.
To Next Page
Loading...
