2 - 10
Transpector MPH Operating Manual
7 In IP address: type 192.168.1.XXX. The last octet can be any number as long
as it is unique to the network. See Figure 2-10.
8 In Subnet mask: type 255.255.0.0.
9 Click OK.
Figure 2-10 Changing the computer IP address
10 The IP address will now be set to the manual IP address chosen in step 7.
Exit all of the menus and then connect to Transpector MPH.
11 To change the IP address back to its default settings, follow steps 1 through 6
and return the IPv4 properties to their original settings.
To Next Page
Loading...
Need help?
General
