Insulet Omnipod Dash - Blood Glucose Settings - BG Goal Range; Basal and Temp Basal Settings; Maximum Basal Rate

Adjusting Settings 9
104
9 Adjusting Settings
Blood Glucose Settings - BG Goal Range
e Blood Glucose settings allow you to change the BG Goal Range.
e goal of using the Omnipod DASH™ System is to keep your blood glucose
within a certain range. is is called your BG Goal Range. You dene this range by
setting the upper and lower limits of your BG Goal Range. e history graphs and
the Enter BG screens use the BG Goal Range to determine which blood glucose
readings are within your goal and which are above or below your goal.
Note: e Bolus Calculator does not use the BG Goal Range values to calculate a
bolus.
Caution: Check with your healthcare provider before adjusting these settings.
To set the upper and lower limit of your BG Goal Range:
1. Navigate to: Settings icon ( ) > Blood Glucose > BG Goal Range.
2. Set the limits of the BG Goal Range:
a. Tap the Upper Limit eld and enter the desired value. You can also touch
the upper (yellow) circle and slide it up or down to change the upper limit.
b. Tap the Lower Limit eld and enter the desired value. You can also touch
the lower (red) circle and slide it up or down to change the lower limit.
3. Tap SAVE.
Basal and Temp Basal Settings
e following sections describe how to change settings that control basal insulin
delivery: the Maximum Basal Rate and temp basal settings.
Maximum Basal Rate
e Maximum Basal Rate denes an upper limit for any basal rate used in your
Basal Programs and temp basals. Consult your healthcare provider before
changing this setting.
To change your Maximum Basal Rate:
1. Navigate to: Settings icon ( ) > Basal & Temp Basal > Max Basal Rate.
2. Tap the Max Basal Rate eld and enter the new value for your Maximum
Basal Rate.
3. Tap SAVE.
Effective Date: 27SEP2019, ECO-000240