Insulet Omnipod Dash - Chapter 7: Managing Programs and Presets; Basal Programs

75
CHAPTER 7
Managing Programs andPresets
is chapter describes how to create, edit and delete Basal Programs, temp basal
presets and bolus presets. Once set up, you can activate these quickly at a later
time.
Basal Programs
You can create up to 12 Basal Programs. Each Basal Program can contain from
one to 24 basal rates.
Caution: Check with your healthcare provider before adjusting these settings.
Create a new Basal Program
To create a new Basal Program:
1. Navigate to the Create Basal Program screen:
Menu icon (
) > Basal Programs
2. Tap CREATE NEW.
Note: If you already have 12 Basal Programs, CREATE NEW does not appear.
If necessary, you can delete an existing Basal Program.
3. Optional: Tap the Program Name eld and enter a descriptive name for your
new Basal Program. Tap the tick symbol to save the name. e default name
for the Basal Program is “Basal” followed by a number.
4. Optional: Tap a tag to appear next to the name of the new Basal Program. Tap
a second time to deselect the tag. If you do not select a tag, a default tag is used.
5. Tap NEXT.
Effective Date: 27SEP2019, ECO-000240