Insulet Omnipod Dash - The Pdms Lock and PIN Screens

Omnipod DASH™ Insulin Management System 1
10
1 Omnipod DASH™ Insulin Management System
The PDM’s Lock and PIN Screens
Aer you set up your PDM, the Lock and PIN screens appear whenever you wake
up your PDM. e Lock and PIN screens help conrm that you are using the
correct PDM.
e Lock screen displays:
• Your selected background image
• Your customised message
• e amount of insulin on board, if the
Bolus Calculator is on
• Today’s date
• Any alarm or notication messages
Warning: Always identify the
PDM as yours before using it. Using
someone else’s PDM can result in
incorrect insulin delivery for both of
you.
Unlock your PDM
In the remainder of this User Guide,
instructions to “wake up” or “unlock” the
PDM mean to do the following:
1. Press the Power button briey. See the PDM image on page 3 for the location
of the Power button.
2. Unlock the Lock screen by either swiping le to right or by swiping up from
the bottom. e PIN screen appears.
3. Enter your 4-digit PIN.
4. Tap the tick symbol. e Home screen or your most recent screen appears.
Note: If a hazard alarm or an advisory alarm is occurring, the alarm message
appears.
Lock your PDM
To lock your PDM when you have nished using it:
1. Press the Power button briey. is locks the PDM by putting it to sleep.
2. Store your PDM in a safe, accessible location.
Caution: Only press the Power button briey. If the PDM asks if you would like
to “Power o”, tap outside the message to cancel the instruction. Once you begin
Effective Date: 27SEP2019, ECO-000240