Insulet Omnipod Dash - PDM Setup Complete

35
Initial PDM Setup 22 Initial PDM Setup
Other Bolus Settings
e remaining bolus settings are used whether the Bolus Calculator is on or o.
Maximum Bolus
e PDM will not let you request a bolus above the Maximum Bolus setting.
You will see a message if the Bolus Calculator calculates a bolus that is above this
amount.
1. Tap the Max Bolus eld and use the number pad to specify your Maximum
Bolus. Tap the tick symbol to close the number pad.
2. Tap NEXT.
Extended bolus setting
Extending a bolus means that a meal bolus can be delivered over a prolonged
period of time. For a description of the extended bolus feature, see page 142.
1. Toggle the Extended Bolus button to turn the extended bolus feature on or
o.
2. Tap COMPLETE.
e PDM restarts.
PDM Setup Complete
Congratulations! Your PDM is now ready for use. When you are ready to activate
your rst Pod, go to “First Time Activating a Pod” on page 38.
Tip: To adjust the PDM screen time-out or screen brightness, see “Screen display” on
page 94.
Note: Condence reminders and program reminders are turned on by default.
ese reminders cause the PDM or Pod to beep at the beginning and end of
boluses and temp basals, and also once an hour during a long-lasting bolus or
temp basal. For more information, see “Condence reminders” and “Program
reminders” on page102.
Effective Date: 27SEP2019, ECO-000240