Insulet Omnipod Dash - Hazard Alarm List

119
Alarms, Notications, Communication Errors 1010 Alarms, Notications, Communication Errors
Informational Signals List
e Pod and PDM can provide informational tones or vibrations to let you know
that normal PDM and Pod events are occurring as expected. You do not need to
do anything in response to these signals. e PDM does not show an explanatory
message.
Tip: Use the Sound/vibrate button on the right-side of the PDM to control whether
some of these signals sound an audible tone or vibrate (see “e Sound/vibrate
button” on page 113).
Condence reminders –
ese tones or vibrations let you know that your temp
basals and boluses are working as expected. ese reminders are on by default. To
turn them on or o, see “Condence reminders” on page 102.
PDM tones/vibrations: At the start of a temp basal, bolus or extended bolus.
Pod beeps: Once at the end of a temp basal, bolus or extended bolus.
Program reminders – ese beeps remind you that you have a temp basal or
extended bolus running. ese reminders are on by default. To turn them on or
o, see “Program reminders” on page 102.
Pod beeps: Once every 60 minutes while a temp basal or extended bolus is
running.
Pod activation – ese tones or vibrations occur at various times during the Pod
activation process to indicate progress. You cannot turn these o.
Pod beeps: Twice when it has been lled with the minimum amount of
insulin needed for activation (see page 41).
PDM tones/vibrations: When the Pod and PDM are successfully paired.
Pod beeps: Beginning 10 minutes aer the Pod is lled with insulin, the Pod
beeps every ve minutes until insulin delivery has started.
Pod deactivation – PDM sounds a tone or vibrates: Twice when the Pod is
successfully deactivated.
Basal Program changes – ese tones or vibrations inform you of changes to
your Basal Program. You cannot turn these o.
PDM tones/vibrations: When a Basal Program is activated, edited, suspended
or resumed.
Pod beeps: Once every 15 minutes while insulin is suspended.
Cancelling temp basals and boluses – Informs you that the temp basal or bolus
has been successfully cancelled.
Effective Date: 27SEP2019, ECO-000240