Intel Agilex User Manual

Sector Offset Value
0x0C – 0x0F 0x00352E30
For Page 0 if you append the start address bits[31:11] with 13'b0000000000000, the result is
32'b00000000000000010000000000000000 = 0x10000.
If you append the end address 0x00196E0 with 2'b11, the result is 26'b00011001011011100011000011 = 0x65B8C3.
For Page 1 if you append the start address with 13'b0000000000000, the result is
32'b0000000000011100000000000000000000 = 0x700000.
If you append end address 0x00352E30 with 2’b11, the result is 32'b00000000110101001011100011000011 =
0xD4B8C3.
The start and end address must be correlated with the start and end address for each page printed in the .map file.
3.1.10.1.7. Implementing Page Mode and Option Bits in the CFI Flash Memory Device
The following figure shows an sample layout of a .pof with three pages. The end addresses depend on the density of the
flash memory device. For different density devices refer to the Byte Address Range for CFI Flash Memory Devices with
Different Densities table below. The option bits follow the configuration data in memory.
3. Intel Agilex Configuration Schemes
UG-20205 | 2019.10.09
Send Feedback
Intel
®
Agilex
™
Configuration User Guide
69

Intel Agilex Specifications

General

Brand	Intel
Model	Agilex
Category	Microcontrollers
Language	English