USER MANUAL
INTEL® FALCON™ 8+ UAS
© 2017 Intel Corporation. All rights reserved 174
• Take a new CTR and connect it with the problematic Intel® Falcon™ 8+ UAV and
repeat the test.
If the issue persists it is very likely the Intel® Falcon™ 8+ UAV, if the issue
disappears it very likely is coming from the CTR.
When the issue has been isolated, please contact the support team, describe your
finding precisely and be prepared to provide log files of the flight tests.
If you do not have a second CTR / Intel® Falcon™ 8+ UAV available, contact Intel
support.
6.2.3. No Preview Video On The Touchscreen Tablet Of The
CTR
If there is no video preview image, please first check:
• The connection between the camera and the Intel® Falcon™ 8+ UAV
• That the camera, Intel® Falcon™ 8+ UAV, the touchscreen tablet and the CTR are
properly switched ON
• Payload:
The signal from the payload might not be fed correctly into the Intel® Falcon™ 8+
UAV. Please check the payload adapter. If you have a different payload available,
please attach it and check the video reception.
• Video transmitter of the Intel® Falcon™ 8+ UAV:
If you have one available, please use a different Intel® Falcon™ 8+ UAV system,
and check if you can receive the video signal from that Intel® Falcon™ 8+ UAV
with the original CTR.
If you can receive video from a different UAV, there is an issue with the video
transmission of the original Intel® Falcon™ 8+ UAV.
• Video receiver of the Intel® Falcon™ 8+ UAV:
If you have one available, please use a different CTR, connect it with your Intel®
Falcon™ 8+ UAV and check if you can receive the video signal with this CTR.
If you can receive video with a different CTR, there is an issue with the video
reception on the original CTR.
When the issue has been isolated, please contact the support team, describe
your finding precisely and be prepared to provide log files of the flight tests.
If you do not have a second CTR / Intel® Falcon™ 8+ UAV available, contact Intel
support.
6.2.4. Flight Logs
It might happen that the Intel® Falcon™ 8+ UAV cannot access a logging storage device
(see “INTEL® FALCON™ 8+ UAV FLIGHT LOGS” on page 64). Mostly, the reason is a
mechanical connection issue or a corrupted file system on the storage device.
To Next Page
Loading...
Need help?
General
