Intel FALCON 8 Plus User Manual

USER MANUAL
INTEL® FALCON™ 8+ UAS
© 2017 Intel Corporation. All rights reserved 175
If the Intel® Falcon™ 8+ UAV cannot access a storage device, a respective warning will
be displayed:
Table 6.4: Possible Warnings
CAUSE VISUAL SIGNAL POSSIBLE FIX
User SD
card can-
not be
accessed.
<- Check Msg appears in
the status line of the Status
Display. Push the related arrow
LEFT button on the CTR until
the Error Message Screen is
shown. No user SD card
will be shown.
Take out the User SD card, make a
backup copy and format it (file sys-
tem: FAT32, allocation unit size: 32
kilobytes). After reinserting the SD
card into the Intel® Falcon™ 8+ UAV,
it should be accessible.
If no backup copy is needed, the
User SD card can also be formatted
directly by the UAV. To do so:
1. Push ENT to open the menu on
the Status Display.
2. Push the arrow RIGHT button to
navigate to Settings.
3. Push ENT and use the arrow
RIGHT button to navigate to
Format User SD.
4. Push ENT to confirm. The shown
screen appears:
5. Push ENT to confirm the
formatting of the User SD card.
The process starts, a progress
bar is shown. Pushing ESC
cancels the function and brings
you back to the Main Screen.
When the formatting of the SD card
is finished, the Intel® Falcon™ 8+
UAV will immediately create a new
log file and start logging again.

Intel FALCON 8 Plus Specifications

General

Brand	Intel
Model	FALCON 8 Plus
Category	Drones
Language	English