Intermec PC4

Chapter 4 — ESim Commands
ESim for the PC4 and PF8 Printers Programmer’s Reference Manual 87
To select an 8 bit character set for use in Sweden with a Keyboard
display unit, see the command I8,1,0486 8.
i - Asian Character Spacing
Purpose: Use this command to place an adjustable inter-character space
between Asian font characters. The inter-character spacing gets
multiplied with the text string by the horizontal and vertical
multiplier values of the selected font. For help, see “A - Printing
Text” on page 34.
Syntax: ip
1
Example:
To select 8 dot spacing between Asian characters, use the command
below:
i8 
iCommand: Parameter p
1
set to 0 (default)
iCommand: Parameter p
1
set to 8 (dots)