Chapter 4 — ESim Commands
72 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
Example:
eR - User-Defined Error/Status Character Control
Purpose: Use this command to control error messages format when command
US has enabled the status reporting feature and also when some high
priority error types occur even though command UN has disabled
status report.
Syntax: eRp
1
,p
2
,[,p
3
]
.
Command
Manual
Action
Reply Comments
US
<ACK>
Enables error repor
ting.
AA Command sent with syntax error
(01).
Open cover <NAK>11<XOFF> Manual action to generate error
(11). Printer enters error-waiting-
recovering state.
UV Queues command to print product
ID.
^ee 01,11<CR><LF> Command reports all errors/status.
Close cover <XON>1-972600-33, g
g Base3.33<CR><LF>
Manual action clears error 11.
Command UV performed.
P <NAK>01<XOFF> Print command reports syntax error
01.
Press Feed
button
<XON> Manual action to clear error status.
eR Command Parameter Descriptions
Parameter Description
p
1
Reply error action single character when error
occurs:
Value of p
1
is one single ASCII character,
except hex 00. Default is 0.
To Next Page
Loading...
