Intermec PC4

Chapter 4 — ESim Commands
92 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
P1 
Line Draw Black Example
LS - Line Draw Diagonal
Purpose: Use this command to draw diagonal black lines to overwrite previous
information.
Syntax: LSp
1
,p
2
,p
3
,p
4
,p
5
.
Example:
This example draws a diagonal line.
N

LS10,10,20,200,200 
Line A
Line B
LS Command Parameter Descriptions
Parameter Description
p
1
Horizontal start position (X) in dots.
p
2
Vertical start position (Y) in dots.
p
3
Line thickness in dots.
p
4
Horizontal end position (X) in dots.
p
5
Vertical end position (Y) in dots.