Chapter 4 — ESim Commands
122 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
Remarks: Also see “I - Character Selection” on page 84, “U- Print
Configuration (General)” on page 115, and “UI - Enable
Prompts/Code Page Inquiry” on page 119.
US - Enable Error Reporting
Purpose: Use this command to enable the status reporting feature with
optional direct recovery.
Syntax:
US [A] [B] [E]
.
Remarks: Any or all parameters can be activated at the same time. Refer to
Appendix A for information on error types.
Parameters are saved in Flash memory.
p
6
External font memory allocation size in
kilobytes.
p
7
External font memory free in kilobytes.
p
8
Number of data bits.
p
9
Code page.
p
10
Country code.
UP Command Parameter Descriptions (continued)
Parameter Description
US Command Parameter Descriptions
Parameter Description
A If any error of type A occurs, the printer
attempts to directly recover and continue in
normal mode with no stop for recovery. Often
performed with the Feed button.
B If any error of type A occurs, the printer
attempts to directly recover and continue in
normal mode with no stop for recovery. Often
performed with the Feed button.
E Error 13 LTS reply control (label taken
sensor). Returns error 13 if LTS detects a label
before and after printing.
To Next Page
Loading...
