Chapter 3 — Designing Bar Code Labels
ESim for the PC4 and PF8 Printers Programmer’s Reference Manual 25
Example with Retrieving Label Forms
In this example, you will retrieve a label form in the printer’s memory.
Before you perform this procedure, you must first create a form and
store it. For help, see “Example with Storing Label Forms” on
page 23.
Specifically, you will retrieve the form “TEST” that you created in the
previous chapter.
B280,440,0,1,2,3,96,B,“S”C0 Bar code with fixed data and
first counter.
HH24,12,“LOGO”
Write graphic from graphics
memory.
FE
Closing command to store
form.
Values for the Sample Label (continued)
Command Explanation
Command Explanation
CR/LF to start command structure
FR“TEST”
Retrieve form
?
Call for variables
EASYCODER
Substitute variable V00
501SA
Substitute variable V01
Dan
Substitute variable V02
100000
Counter start value C0
P1,2
Print 2 copies of a single label
Note: It is critical to the syntax to send exactly the same number of
variable lines as defined for the label form.
To Next Page
Loading...
