Intermec PC4

Chapter 4 — ESim Commands
ESim for the PC4 and PF8 Printers Programmer’s Reference Manual 113
SPC - Setup Print Copy
Purpose: Use this command is to change the function of the Feed button to
print a copy of the label currently residing in the image buffer.
Syntax:
SPCp
1
.
Remarks: The following commands disable Print Copy when SPC1 is set: A, b, B,
GW, GG, LE, LO, LS, LW, N, q, Q, r, R, X, and Info. The current SPC
value is stored in Flash memory and printed on the test label.
Example:
This example shows how to activate Print Copy, see command below:
SPC1 
TD - Define Date Format
Purpose: Use this command to define the date format when printing.
Syntax:
TDp
1
[/p
2
/p
3
]
SPC Command Parameter Descriptions
Parameter Description
p
1
Setup Print Copy value:
0 = Media feeds as usual when the Feed
buttonis pressed (default).
1 = Print Copy is activated, but is disabled if
the A, b, B, GW, GG, LE, LO, LS, LW, N, q, Q, r,
R, X, and Info commands have been sent since
the last printout.
2 - Print Copy is activated. In this state,
additional fields can be added to the existing
image and printed by pressing the Feed
button.