Intermec PC4

Chapter 4 — ESim Commands
ESim for the PC4 and PF8 Printers Programmer’s Reference Manual 79
Example:
This example prints the graphic “LOGO,” see command below:
GG50,50,“LOGO”

GI - Print Graphics Information
Purpose: Use this command to print a list of all graphics stored in memory.
Syntax: GI
Remarks: The GI command is executed directly without appending a Linefeed.
Issue a GI command after having stored a graphic to make sure the
storing was successful, and to check the amount of free graphic
memory.
GK - Delete Graphics
Purpose: Use this command to delete a specified graphic or all graphics from
memory.
Syntax: GK“name”|“*”
Example1:
To delete the graphic named “LOGO”:
GK“LOGO” 
Example 2:
To delete all graphics:
GK“*” 
GM - Store Graphics In Memory
Purpose: Use this command to store .pcx graphic files in Flash memory.
Syntax: GM“name”p
1
“DATA”
GK Command Parameter Descriptions
Parameter Description
“name” Only the named form is deleted from memory.
“*” If an asterisk (*) is entered as a wildcard
instead of a name, all forms are deleted from
memory.