Intermec PC4

Chapter A — Error Handling
ESim for the PC4 and PF8 Printers Programmer’s Reference Manual 159
Error Response Messages
This table contains explanations for the text error messages listed in
the “Error Response Tables” on page 160.
Error Text Description
Text Description
Error Referred error number divided in code and type.
Code Referred error number.
Type Letter is a classifying of error.
Description Short friendly explanation.
Error response Response depending on error reporting flag
controlled by US and UN commands.
LED Color of LED indicator:
Green (GRN)
Red (RED)
Blinking red (BLNK RED)
Orange (ORA)
Serial Output on serial line (RS-232 or USB) at error
response.
Response at ^ee Output on serial line of error number, if only
one error is available.
<LF> 0x0a
<CR> 0x0d
<CRLF> 0x0d + 0x0a
<XON> 0x11
<XOFF> 0x13
<NAK> 0x15
- Nothing happens
[XOFF] Flag for waiting on error recovery. Default value
is <XOFF> = 0x13, but can be substituted with
command eRp
1
,6,p
3
where p
1
is replacement of
<XOFF> and where p
3
is a replacement of
<XON>.