Intermec PC4

Chapter 4 — ESim Commands
76 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
FK - Delete Form
Purpose: Use this command to delete a specified form or all forms from
memory.
Syntax: FK“name”|“*”
.
Example 1:
To delete a form named FORM1, enter the command below:
FK“FORM1” 
Example 2:
To delete all forms, enter the command below:
FL“*”

FR - Retrieve Form
Purpose: Use this command is to retrieve a form that was previously stored in
memory.
Syntax: FR“name”
.
Remarks: To print a list of forms currently stored in memory, use the FI
command.
FK Command Parameter Descriptions
Parameter Description
“name” The named form is deleted from memory.
“*” If an asterisk (*) is entered as a wildcard
instead of a name, all forms are deleted from
memory.
FR Command Parameter Descriptions
Parameter Description
“name” This is the form name used when the form was
stored. The printer is case-sensitive.