Intermec PC4

Chapter 4 — ESim Commands
34 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
;B50,100,0,UE0,2,6,200,B,"123456"
P1
A - Printing Text
Purpose: Use the A command to print an ASCII text string.
Syntax: Ap
1
, p
2
, p
3
, p
4
, p
5
, p
6
, p
7
,“DATA”
A Command Parameter Descriptions
Parameter Description
p
1
Horizontal start position (x)
in dots.
p
2
Vertical start position (y) in
dots.
p
3
Rotation:
0 = No rotation (left to right)
1 = 90° rotation (left to right)
2 = 180° rotation (left to right)
3 = 270° rotation (left to right)
4 = No rotation. Top to bottom. Asian fonts (p4=8) only.
5 = 90° rotation. Top to bottom. Asian fonts (p4=8) only.
6 = 180° rotation. Top to bottom. Asian fonts (p4=8) only.
7 = 270° rotation. Top to bottom. Asian fonts (p4=8) only.