Intermec PC4

Chapter 4 — ESim Commands
ESim for the PC4 and PF8 Printers Programmer’s Reference Manual 35
p
4
Font selection:
203.2 dpi (8 dots/mm)
1 = 20.3 cpi, 6 points (8 x 12
dots)
2 = 16.9 cpi, 7 points (10 x 16
dots)
3 = 14.5 cpi, 10 points (12 x
20 dots)
4 = 12.7 cpi, 12 points (14 x
24 dots)
5 = 5.6 cpi, 24 points (32 x 48
dots)
8 = Asian fonts:
Korean, Korea.24
Chinese GB, GB.24
Chinese BIG-5, Big5.24
Japanese, Japanese.24
Latin (PC4 only)
300 dpi (11.81 dots/mm)
25 cpi, 4 points (12 x 20 dots)
8.75 cpi, 6 points (16 x 28
dots)
15 cpi, 8 points (20 x 36 dots)
12.5 cpi, 10 points (24 x 44
dots)
6.25 cpi, 21 points (48 x 80
dots)
(24 x 24 dots in a double-
byte)
(24 x 24 dots in a double-
byte)
(24 x 24 dots in a double-
byte)
(24 x 24 dots in a double-
byte)
(24 x 24 dots in a single-byte,
included in all .24 fonts) (dot
size controlled by ES
command.)
A Command Parameter Descriptions (continued)
Parameter Description