Intermec PC4

Chapter 4 — ESim Commands
36 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
Example:

N 
A50,0,0,1,1,1,N,“Example 1” 
A50,50,0,2,1,1,N,“Example 2” 
A50,100,0,3,1,1,N,“Example 3” 
A50,150,0,4,1,1,N,“Example 4” 
A50,200,0,5,1,1,N,“EXAMPLE 5” 
A50,300,0,3,2,2,R,“Example 6” 
P1 
Cosecutive Example
p
5
Horizontal multiplier 1, 2, 3, 4, 5, 6, 7, 8
p
6
Vertical multiplier 1, 2, 3, 4, 5, 6, 7, 8, 9
p
7
N = Normal image
R = Reverse image
“DATA” Represents a fixed data field.
When using Asian double-byte fonts, specify both bytes as
ASCII decimal values, starting with the first value being
larger than ASCII 127 decimal (ASCII 7F hex), or below
ASCII 127 (ASCII 7F hex) decimal to specify a Latin
character.
A Command Parameter Descriptions (continued)
Parameter Description