Intermec PC4

Chapter 4 — ESim Commands
ESim for the PC4 and PF8 Printers Programmer’s Reference Manual 121
Remarks: Also see “I - Character Selection” on page 84, “U- Print
Configuration (General)” on page 115, “UI - Enable Prompts/
Code Page Inquiry” on page 119, and “UP - Code Page and
Memory Inquiry Print” on page 121.
Example:
This example returns the current code page:
UM 
UM1050,998.0,8.3,40,1,37,2 UI80,001,B581
UN - Disable Error Reporting
Purpose: Use this command to disable error reporting.
Syntax: UN
Remarks: Cancels US command.
UP - Code Page and Memory Inquiry Print
Purpose: Use this command to print and send the currently selected code page,
and memory status to the host through the RS-232 or USB port.
Syntax: UP
The printer:
• sends information on the currently selected code page and
memory status back to the host (same as UM command).
• prints the current printer configuration.
The format of the data sent to the host in the following formats:
UMp
1
,p
2
,p
3
,p
4
,p
5
,p
6
,p
7
UIp
8
,p
9
,p
10
.
UP Command Parameter Descriptions
Parameter Description
p
1
Image buffer size in kilobytes.
p
2
Form memory allocation size in kilobytes.
p
3
Form memory free in kilobytes.
p
4
Graphic memory allocation size in kilobytes.
p
5
Graphic memory free in kilobytes