Intermec PC4

Chapter 4 — ESim Commands
ESim for the PC4 and PF8 Printers Programmer’s Reference Manual 125
If no justification is selected, the field adjusts to fit the actual length
of the data without exceeding the set maximum field length, which
may be useful when using a counter as input data to a bar code.
To print the contents of a variable, the number of the variable must be
included in the "DATA" field of the A (Print Text) or B (Print Bar
Code) commands.
Example:
This example shows how the field justification works in variable
fields.
FK"TEST7"

FS"TEST7" 
V00,10,L,"Variable 00" 
V01,10,R,"Variable 01" 
V02,10,C,"Variable 02" 
V03,10,N,"Variable 03" 
A50,50,0,3,1,1,N,"TEXT"V00":Left justified" 
A50,100,0,3,1,1,N,"TEXT"V01":Right justified" 
A50,150,0,3,1,1,N,"TEXT"V02":Center justified" 
A50,200,0,3,1,1,N,"TEXT"V03":No justification" 
FE 
Refer to the ? command for a continuation of this example.
W - Windows Mode
Purpose: Use this command to enable/disable the Windows command mode
(special applications only).
Syntax: Wp
1
.
W Command Parameter Descriptions
Parameter Description
p
1
Windows mode enable/disable:
Y = Enables Windows mode.
N = Disables Windows mode (default).