Intermec PC4

Chapter A — Error Handling
158 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
Error Types
Classified types of error and status codes. For details, see the “Error
Response Messages” on page 159 and the full “Error Response
Tables” on page 160.
Classifications of Error and Status Codes
Type Feature Generates Recovery
A Minor error of
command
sequence or
similar.
At error reporting
(command US): Sets error
on print command and sets
the orange or red LED.
At no error reporting
(command UN): Green LED
at print command
At Error reporting
(command US): Feed
button or command Reset
^@. See also command USA.
At no Error reporting
(command UN): No
recovery necessary, already
done.
BPrint stopping
error.
LED: orange or red Feed button or command
Reset ^@. See also command
USB.
C Paper end
stopping error.
LED: red Load new media and press
the Feed button or
command reset ^@.
D Error of printing
functionality and
status.
LED: red, may blink Manual or automatic
(temperature lowered)
measure or command reset
^@.
E Status changes. No LED change No recover necessary/Delete
Label from LTS. See also
command reset ^@.
F Unrecoverable
Error.
LED: red Power Off/ON or command
reset ^@.
G Dump mode. LED: green Feed button or command
reset ^@
H Pause mode. LED: blinks green and
orange.
Feed button or command
^B or ^C.