Intermec PC4

Chapter 4 — ESim Commands
90 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
This example shows the adjustment for peel-off operation at 8 dots/
mm.
j110 
Example 2:
This example shows the adjustment for peel-off operation at 8 dots/
mm.
j136 
LE - Line Draw Exclusive
Purpose: Use this command to draw black lines where the line needs to be
white when intersecting a black area or object or black when
intersecting a white object or area.
Syntax: LEp
1
,p
2
,p
3
,p
4
Example:
This example draws two lines (A and B) intersecting one another.
N

LE50,200,400,20 
LE200,50,20,400 
P1 
LF Command Parameter Descriptions
Parameter Description
p
1
Horizontal start position (X) in dots.
p
2
Vertical start position (Y) in dots.
p
3
Horizontal length in dots
p
4
Vertical length in dots