Intermec PC4

Chapter 4 — ESim Commands
66 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
This example renders a box and orders the printer to print 4 copies. At
command ^A, the printing is paused and interrogated for remaining
number of labels. Printing is continued again at command ^C.
X0,0,10,20,40

P4 
^A 
^D 
^C 
EI - List Soft Fonts
Purpose: Use this command to print a list of all soft fonts that are stored in
memory.
Syntax: FE
Remarks: This command is related to ES (Store Soft Fonts) and EK (Delete Soft
Fonts).
Example:
To print a soft font list, enter the command below:
EI 
EK - Delete Soft Font
Purpose: Use this command to delete soft fonts from memory.
Syntax: EK[“name”|“*”]
Remarks: Soft fonts are stored using the ES command and listed using the EI
command.
You can also delete soft fonts from the printer using a program such
as Intermec LabelShop or Intermec InterDriver.
Example: