Intermec PC4

Chapter 3 — Designing Bar Code Labels
24 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
5 Copy the text you just pasted in the text editor and paste it into
HyperTerminal.
6 Press Enter. The printer is now saved in the printer’s memory. You
can retrieve it later on to edit or print.
The next table explains these values.
Note: Make sure to delete any extraneous formatting marks. If
necessary, substitute the curly quotation marks (“) with straight
quotation marks (
“)
Values for the Sample Label
Command Explanation
 CR/LF to start command
structure.
FK“TEST”
 Delete any existing form
named TEST.
FS”TEST”
 Start store form named
TEST.
V00,15,N,“Enter Product name:”
 Define first variable.
V01,10,L,“Enter Model number:”
 Define second variable.
V02,8,N,“Checked by”:
 Define third variable.
C0,6,L,+1,”Enter Serial Number:”
 Define counter.
X0,0,4,752,584
 Draw a box.
LO0,144,752,4
 Draw a line.
LO440,232,4,160
 Draw a line.
A40,400,1,1,1,1,N,“Made in Sweden”
 90° text line containing fixed
data.
A24,160,0,5,1,1,R,V00
 Write a text line, first
variable.
A24,250,0,4,1,1,N,“MODEL:”V01
 Write a text line, second
variable.
A472,312,0,4,1,1,N,”Checked by:“V02
 Write a text line, third
variable.
A24,312,0,4,1,1,N,“SERIAL#:“C0”
 Write a text line with fixed
data and first counter.