Chapter 1 — Introducing ESim
4 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
Print Setup Commands
Command Description
DDensity
fCut position
JB Disable top of form backup
JF Enable top of form backup
j Media feed adjustment
O Option select
QSet form length
q Set label width
R Set reference point
r Set relative reference point
S Speed select
SA Setup adjust
SPC Setup print copy
Z Print direction
Error Setup Commands
Command Description
eR User-defined error/status character control
UN Disable error reporting
US Enable error reporting
Store and Clean Commands
Command Description
EK Delete soft font
ES Store soft font
GK Delete graphics
GM Store graphics in memory
M Memory allocation
To Next Page
Loading...
