Intermec PC4

Chapter 3 — Designing Bar Code Labels
22 ESim for the PC4 and PF8 Printers Programmer’s Reference Manual
5 Copy the text you just pasted in the text editor and paste it to
HyperTerminal and press Enter.
The next table explains these values.
Values for the Sample Label
Command Explanation
 CR/LF to start command
structure.
N
 Clear image memory.
X0,0,4,752,584
 Draw a box.
LO0,144,752,4
 Disable label taken sensor.
A40,400,1,1,1,1,N,“Made in Sweden”
 Write a 90° text line of fixed
data.
A24,160,0,5,1,1,R,“EASYCODER”
 Write a text line of fixed data.
24,250,0,4,1,1,N,“MODEL: 501SA”
 Write a text line of fixed data.
A472,312,0,4,1,1,N,“Checked by: Dan”
 Write a text line of fixed data.
A24,312,0,4,1,1,N,“SERIAL#: 000001”
 Write a text line of fixed data.
A24,312,0,4,1,1,N,“SERIAL#: 000001”
 Write a text line of fixed data.
B280,440,0,1,2,3,96,B,“S00000”
 Write a text line of fixed data.
GG24,12,“LOGO”
 Write a graphic from graphics
memory.
P1
 Print command to image
buffer, and prints 1 copy.