Invacare Bora - Page 54

SERVICE MANUAL
Invacare
®
- Bora/Spectra XTR
54
• Remove all plugs (1) from the electronics
module.
• Mark the positions of individual plugs for later
reassembly.
• Loosen the screws (1) on both sides of the
electronics module with the Phillips
screwdriver and remove them.
• Remove the electronics module.
• Reassembly of the electronics module takes
place in reverse order.
• Update the drive program if a new software
version is available as described in Chapter
7.6.
• Adapt the drive program using the
programming software if necessary.
• To complete, check all vehicle functions.