74
7.10 Differences when replacing the REM24 remote
Requirements:
• To adapt the drive program: programming software or hand programming device and REM24
Note
All REM24 remotes are delivered with a standard drive program. If you have carried out
customer-specific modifications to the drive program, you will have to make these changes again
after installing the new electronics module.
WARNING!
Any changes to the drive program can affect the driving characteristics and the tipping
stability of the mobility device!
• Changes to the drive program may only be carried out by trained Invacare® specialist dealers!
• Invacare® can only give a warranty for safe mobility device driving behaviour - especially the
tipping stability - for unaltered standard drive program!
To Next Page
Loading...
