CAUTION!
Property damage can result if the counter is wrongly connected. If the plus and minus
wires are connected the wrong way, it will damage the electronic components of the
operating hours counter.
installed in reverse order.
• Connect the plug on the blue wire (-) to the
pin on the operating hours counter which is
marked with a “minus” symbol.
• Connect the plug on the brown wire (+) to the
pin on the operating hours counter which is
marked with a “plus” symbol.
The brown wire is additionally marked with a
yellow sleeve with a “plus” symbol on it.
• Secure the cable with a cable tie (3), thereby
protecting it from being pulled off
unintentionally.
• Close the casing and reattach it to the
wheelchair with the Velcro fastening.
• Reinstall all remaining components in reverse
order.
To Next Page
Loading...
