27 Auxiliary motor 1 start
Please refer to the detailed instruction of P24.10,
P24.11 and P24.12.
28 Auxiliary motor 2 start
29~30 Reserved
Relative parameters list:
Function
code
Name Detailed instruction of parameters
Default
value
P06.00 HDO output
0:Open collector pole high speed pulse
output
1: Open collector pole output
0
P06.01 Y1 output
0:Invalid
1:On operation
2:Forward rotation operation
3:Reverse rotation operation
4: Jogging operation
5:The inverter fault
6:FDT1
7:FDT2
8:Frequency arrival
9:Zero speed running
10:Upper limit frequency arrival
11:Lower limit frequency arrival
12:Ready for operation
13:Reserved
14:Ooverload pre-alarm
15: Uunderload pre-alarm
16:Ccompletion of simple PLC step
17:Completion of simple PLC cycle
18:Setting count value arrival
19:Defined count value arrival
20:External fault valid
21:Length arrival
22:Running time arrival
23:MODBUS communication virtual
terminals output
0
P06.02 HDO output 0
P06.03 Relay RO1 output 1
P06.04 Relay RO2 output 5
To Next Page
Loading...
