INVT GD270-030-4 - Page 219

Goodrive270 series VFD for fan and pump Function parameter list
-209-
Function
code
Name Description Default
Modify
P17.15
Torque reference
value
Relative to the percentage of the rated torque of
the present motor, displaying the torque
reference.
Range:
-300.0%±300.0% (of the motor rated
current)
20.0% ƽ
P17.16
Linear speed
0±65535
0
ƽ
P17.17
Reserved
P17.18
Count value
0±65535
0
ƽ
P17.19 AI1 input voltage
Displays the AI1 input signal.
Range: 0.00±10.00V
0.00V ƽ
P17.20 AI2 input voltage
Displays the AI2 input signal.
Range: -10.00V±10.00V
0.00V ƽ
P17.21
HDIA input
frequency
Display HDIA input frequency.
Range: 0.000
±50.000kHz
0.000
kHz
ƽ
P17.22
Reserved
Reserved
P17.23 PID reference value
Displays the PID reference value.
Range: -100.0±100.0%
0.0% ƽ
P17.24 PID feedback value
Displays the PID feedback value.
Range: -100.0±100.0%
0.0% ƽ
P17.25 Motor power factor
Displays
the power factor of the current motor.
Range: -1.00±1.00
1.00 ƽ
P17.26 Duration of this run
Displays the duration of this run of the VFD.
Range: 0±65535min
0m ƽ
P17.27
Present step of
simple PLC
Used to display the present step of the simple
PLC function.
0 ƽ
P17.28
Motor ASR controller
output
Displays the ASR controller output value under
the vector control mode, relative to the
percentage of rated motor torque.
Range:
-300.0%±300.0% (of the motor rated
current)
0.0% ƽ
P17.29
Pole angle of
open-loop SM
Displays the initial identification angle of SM.
Range: 0.0±360.0
0.0 ƽ
P17.30
Phase
compensation of SM
Displays the phase compensation of SM.
Range: -180.0±180.0
0.0 ƽ
P17.31
High-frequency
superposition
current of SM
0.0%
±200.0% (of the motor rated current) 0.0 ƽ
P17.32
Motor flux linkage
0.0%±200.0%
0.0%
ƽ