Chapter 1 BEFORE USING THE MACHINE
5. Slide the Label Guide to fit the
paper width.
Push the Cassette
slowly so as not to get
your fingers caught
between the Cassette
and the main body.
6. Push the Cassette straight into the
main body to return to its original
position, and lower the Thermal
Head Cover.
Confirm that the
backing paper is wound
up smoothly.
If the backing paper is
wound up diagonally,
reconfirm on the label
passing, label stop
position with the
Backing Paper Stopper,
and the Label Guide
width.
7. Touch [FEED] on the screen to
issue a label.
At this time, confirm that the label is
completely peeled off.
SR-2000α User’s Manual (No. 0000A) 1-7
To Next Page
Loading...
