ISHIDA SR-2000 alpha - PLU Data Registration 2;3

Chapter 5 PROGRAMING MODE
PLU Data Registration 2/3
Entry examples are shown below. Select necessary items to register.
Item Operation
Example: Extra message 1 number “3”
Touch on the screen to access to the selection screen.
Then, touch one of the following buttons to select.
When referring to the reference data setting
When printing the pack time on the label
When not printing the pack time on the label
Example: Pack time “12:34”
Touch (Sell-by Time Print) on the screen to access to the selection
screen.
Then, touch one of the following buttons to select.
When referring to the reference data setting
When printing the sell-by time on the label
When not printing the sell-by time on the label
Example: Sell-by time “14:24”
Example: Register the message number “20” in Free Message 2.
5-8 SR-2000α User’s Manual (No. 0000A)