Chapter 2 OPERATION MODE
2.5 TARE WEIGHT SUBTRACTION
Tare weight subtraction is performed prior to weighing a product.
When the tare weight subtraction is required, select one of the following procedures to perform.
Actual Tare Weight
When the tare weight is unknown, weigh the tare to subtract the weight.
1. Place the tare on the weighing
platter.
The tare weight is displayed.
When canceling the
tare subtraction,
remove the tare from
the weighing platter,
enter “0”, and touch the
TARE key again.
2. Touch the TARE key on the keypad
to register the tare weight.
The registered tare weight appears
in the TARE field.
Input Tare Weight
When the tare weight is known, enter the tare weight data using the keypad.
1. Enter the tare weight and press the
TARE key on the keypad to
register the tare weight.
Example: Tare weight “0.020 lb”
The registered tare weight appears
in the TARE field.
SR-2000α User’s Manual (No. 0000A) 2-9
To Next Page
Loading...
