Chapter 5 PROGRAMING MODE
PLU Name Edit
1. Confirm that the Registration Menu
screen is displayed.
Then, touch [PRESET KEYS] on
the screen.
2. The Preset Key Registration
screen (with PLU preset keys)
appears on the display.
Then, touch [EDIT] on the screen.
3. Touch the desired PLU preset key.
Fore more detailed text
editing operations, see
Appendix “Text
Editing”.
4. The text edit screen appears for
the PLU name.
Enter the desired characters and
edit the text using the screen keys.
When the text editing is complete,
touch [RETURN] on the screen.
5-28 SR-2000α User’s Manual (No. 0000A)
To Next Page
Loading...
