Chapter 3 TOTAL ADJUSTMENT MODE
3. Enter the PLU number using the
keypad and press the PLU key to
call.
Example: PLU number “5”
4. Place the product on the weighing
platter, then the total price is
calculated based on the actual
weight.
See Section 2.6 in
Chapter 2 “Discount
Operations” for more
detailed procedure.
5. When a discount operation is
required, touch one of the following
buttons to select.
The weighed data is displayed in
the corresponding data field.
Then, touch [SUB] (Subtraction) on
the screen.
6. The confirmation screen will
appear for execution.
Then, touch [EXECUTE] to
subtract.
The label will be issued.
SR-2000α User’s Manual (No. 0000A) 3-11
To Next Page
Loading...
