ITech IT7900 Series

SYSTem Commands
Copyright © ITECH Electronic Co., Ltd. 25
Arguments
ONE|THRee|DIFFerence|MULTichannel
Default value
ONE
Returns
ONE|THRee|DIFFerence|MULTichannel
Example
SYST:FUNC ONE
Query syntax
SYSTem:FUNCtion?
SYSTem:BRIGhtness:LEVel <NR1>
This command is used to set and query the screen brightness of the present
power supply, the setting range is 1-10.
Syntax
SYSTem:BRIGhtness:LEVel <NR1>
Arguments
1-10
Returns
<NR1>
Default value
8
Example
SYST:BRIG:LEVel 10
Query syntax
SYSTem:BRIGhtness:LEVel?
SYSTem:TOUCh[:STATe] <CPD>
This command is used to set and query the touch screen status of the screen,
0|OFF means the touch screen is turned off, 1|ON means the touch screen is
turned on.
Syntax
SYSTem:TOUCh[:STATe] <CPD>