Operation
Drive Controls, Switches and Instruments
40 40
9811-3400-4
Transmission Modes
To ensure selection of the most applicable gear ratio and
shift points for a given machine application, the operator
can select one of two transmission modes. These modes
can be selected by means of a cab mounted switch.
K
Fig 26. ( T 40).
Use the selector switch to select the transmission mode
which is most suitable for the terrain and work you are
doing.
T007210-2
Fig 26.
1st gear will remain selected. If another range or direction
is selected or either of the kickdown buttons are pressed,
the kickdown will be cancelled and 2nd gear will be
selected.
Note: Kickdown only operates with 2nd gear selected.
Note: Reverse has only 3 gears (1st, 2nd and 3rd).
Table 1. 4-Speed Manual Mode (A/M Switch OFF)
Table 2. 4-Speed Automatic Mode (A/M Switch ON)
M Manual Mode (A/M Switch OFF). Allows the
operator to manually select and hold 1st, 2nd or
3rd gear. K
Table 1. 4-Speed Manual Mode (A/
M Switch OFF) ( T 40).
A Automatic Mode (A/M Switch ON). Autoshifts
from 1st to the gear selected on barrel 4.
K
Table 2. 4-Speed Automatic Mode (A/M
Switch ON) ( T 40).
Barrel
Position
Forward Reverse Kickdown
1 1st 1st None
2 2nd 2nd F1, R1
3 3rd 3rd None
4 Auto
2nd - 4th
Auto
2nd - 3rd
F1, R1
from 2nd
Kickdown 2nd to 1st immediately on
request.
Yes
Must hold 1st after kickdown pressed
(reverts to 2nd on direction change).
Yes
Kick back up 1st to 2nd immediately on
request.
Yes
Summary: Autoshifts 2nd to 4th with
manual selection of 1st, 2nd and 3rd
gears.
Barrel
Position
Forward Reverse Kickdown
1 1st 1st None
2 Auto
1st - 2nd
Auto
1st - 2nd
F1, R1
3 Auto 1st -
2nd - 3rd
Auto 1st -
2nd - 3rd
F1, R1
from 2nd
4 Auto
1st - 2nd -
3rd - 4th
Auto
1st - 2nd -
3rd
F1, R1
from 2nd
Kickdown 2nd to 1st immediately on
request
Yes
Must hold 1st after kickdown pressed
(reverts to 2nd on direction change)
Yes
Kick back up 1st to 2nd immediately on
request
Speed
Dependant
Summary: Autoshifts 1st to 4th (fully
automatic). Engine braking and manual
downshift.
To Next Page
Loading...
