EasyManua.ls Logo

jcb 426 - Page 57

jcb 426
226 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
Drive Controls, Switches and Instruments
45 45
9811-3400-4
Roof Panel Switches
!MWARNING
Do not drive on the road with the work lights switched
on. You can interfere with other drivers visibility and
cause an accident.
2-2-2-5_1
Front Work Lights
340100-1
Three position rocker switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 3: Outer Work Lights ON
Position 2: Inner and Outer Work Lights
ON
Note: The work lights work independently of the main
lights circuit.
Note: On Italian and German machines, it is not possible
to have the headlights and the front worklights switched
on at the same time.
Rear Work Lights
340090-1
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 2: ON
Note: The work lights work independently of the main
lights circuit.
Heated Mirrors (if fitted)
A339880-1
Two position rocker switch with backlight.
The switch functions operate when the
starter switch is in the ON position.
Position 1: OFF (Backlight OFF).
Position 2: ON (Backlight ON).
Heated Seat (if fitted)
A347040-1
Two position rocker switch with backlight.
The switch functions operate when the
starter switch is in the ON position.
Position 1: OFF (Backlight OFF).
Position 2: ON (Backlight ON).
Beacon
339711-1
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON and OFF positions.
Position 1: OFF
Position 2: ON
Before you operate the switch, refer to Beacon.

Table of Contents

Related product manuals