JDS Uniphase DSAM-3500 - Configuring Web Access; Figure 105 Access - Local Browser; Testing Web Access; Web Access Test

Chapter 6 Access Mode
Access – Browser Tab
DSAM Help User Guide Rev. 001 113
Web Access Test The Web Access Test enables you to connect to a JDS Uniphase
Corporation test page on the internet to ensure internet connectivity. It
accesses a single screen for view only.
Configuring Web
Access
To configure web access
1 To select your connection type and enter proxy information, follow
the instructions under “Configuring WFA Browser Settings” on
page 98.
2 To select a DOCSIS channel, follow the instructions under
“Configuring Access Channels” on page 85.
Testing Web Access To test web access
1 Press Access.
2 Press the Browser softkey.
Figure 105 Access – Local Browser
21128026 R001 DSAM Help User Guide.book Page 113 Thursday, February 5, 2009 2:02 PM